Products -  
     
 

VARIABLE AUTO TRANSFORMER

 
 
Varistat  is a continuously variable autotransformer, having a movable carbon, sliding on a silver plated commutator, by either manual or by motor, give an out put voltage from zero. varistat confirms IS/5142/69,  IS/5142/69. Range of Products is from 0.75 Amp to 200 Amp in 1 Phase, 2 Phase or 3 Phase.
 
     
   FEATURES -  
     
 
RUGGED CONSTRUCTION :
  Varistat are designed for trouble free operation in industrial use. It is designed o give maximum life under extreme conditions.
   
HIGH EFFICIENCY :
 
Varistat designed with low flux density, low current density and high insulation standards. Selection of carbon from the best grade of raw material will keep a high standard of quality of varistat
   
EXCELLENT REGULATION :
  Varistat have minimum voltage drop in from no load to full load.
   
LOW MAGNETIZING CURRENT:
 
Varistat made with high quality grain oriented silicon steel, in adequate quantity so the iron losses are controlled to minimum. the no load current is always less than 3% of the ruled current
   
NO WAVE FORM DISTORTION :
  Varistat provides an out put voltage wave form which is faithful and distortion less replica of the input voltage wave form
   
LOAD CAPACITY :
  Varistat  is  designed with unity power factor of 0.8. We can put many over load on it because of its Excellent design sufficient off time is provided to reduce the temperature build up specially when repeated over loading takes place.
   
SMOOTH AND LINEAR OUT PUT :
  Carbon brush is in constant contact with more than one turn. (Voltage between the turns is very less) Sparking is avoided & out put can be   set very easily at any point
   
SILVER PLATED COMMUTATOR :
  A special silver plating technique is used on the commutator enabling Varistat to withstand high overloads and maintain constant contact drop. It also insure smooth operation, long life  and resist to corrosion.
   
LOW OPERATING TORQUE :
  A smooth commutators and perfect assembly of coil &    well centered bushes results in very low operating torque which increase life of  motor/    varriac
   
CARBON DEPOSITIONS :
  Specially up to 10 amp Varistat are available with square or round carbon. because of round in shape it rotates on commutators, No traction between the carbon and commutator, so carbon deposition is very less when we use the round carbon. No wear and tear in carbon's diameter, as a result carbon replacement is not required for very long time.
   
DOUBLE WOUND AUTO TRANSFORMER :
  Specially designed double wound Autotransformer have been developed for voltage stabilizer application. these Varistat is also available with inbuilt 12v DC motor, which is very cost effective and time saving for servo manufacturer. These varistat will eliminate the need of buck-boost transformer & AC or DC external motor, its gears , its couplings and other mechanical requirements in stabilizers
   
STABILIZERS :
   * 1 Phase,  2 Phase,  or  3 Phase.
 * Capacity from 500 va to 10kva
 * Wide input range 160 to 200 or as specify
 * Output 230V  + - 1%
 * High speed of corrosion  40 V / Sec.
 * High / low voltage cut off with LED indication.
 * Built in over load and short circuit protection.
 * Applicable for computers and peripherals, Laboratory equipments, office equipments, Xerox and plain copiers, Communication devices, CNC Machines, Medical equipments, Audio- video systems etc.
 
     
 
VARIABLE AUTO TRANSFORMER VARIABLE AUTO TRANSFORMER VARIABLE AUTO TRANSFORMER VARIABLE AUTO TRANSFORMER
VARIABLE AUTO TRANSFORMER VARIABLE AUTO TRANSFORMER VARIABLE AUTO TRANSFORMER  
 
 
     
  Contact Us :  
     
  7/C, P.V.K. Compound, Behind, Near Cafe Faizen, Khairani Road, Sakinaka, Andheri (East), Mumbai - 400 072, Maharashtra, India.  
  Tel : 65889991  
  Mobile : 9821317015  
  Telefax : 2852 2868  
   
HOME - ABOUT US - PRODUCTS - CONTACT US - FEEDBACK - SITEMAP Designed & Hosted by : MID   Promoted by : GID